Change Currency: USD GBP SEK CHF NOK CAD HKD NZD SGD THB ZAR EUR AUD

Redback Alert / Evac Tone Generator

$332.00

Manufacturer: Redback

Product Information

This half rack unit has both Alert and Evacuation tones based on Australian standard AS1670.4. The unit is triggered via standard alert/evac switches on the front of the unit or via remote trigger contacts on the rear. It features a 24V switched output which is enabled when the Alert, Evac or Chime tones are triggered. It is powered from a 24V DC source and features a line out facility and optional Voice Over. It has a choice of 5 individual chime tones and 3 repeating tones as well as momentary and continuous operation of the evacuation tones. 

Note: Power supply not included. Recommend M9391A.
 

Features

  • Individual switched 24VDC output for strobes in alert & evac modes. 
  • Switched 24VDC output for bell. 
  • On board voice over module (was optional). 
  • Polyswitch protection of all switched outputs (limited to 100mA per output). 
  • Spike protection on all triggers. 
  • All controls on outside of unit. 
  • Record indicator on front of unit. 
  • Auto timed switchover from alert to evac (on rear terminals only).Level controls for Alert/Evac, Chime and Voice Over 
  • Auxiliary output 
  • Standard building Alert/Evacuation switches on front panel for Alert/Evac/Chime and Cancel 
  • Externally operated inputs for Alert, Evac, Chime and Cancel by switching to ground 
  • 24V switched output 
  • Built-in voice over module 
  • Choice of single tone or repeating bong 
  • Evacuation tones conform to AS1670.4 
  • All tones crystal locked 
  • Evacuation tones can be configured for momentary or continuous operation 
  • Individual switched 24VDC output for strobes in alert & evac modes. 
  • Switched 24VDC output for bell. 
  • On board voice over module (was optional). 
  • Polyswitch protection of all switched outputs (limited to 100mA per output). 
  • Spike protection on all triggers. 
  • All controls on outside of unit. 
  • Record indicator on front of unit. 
  • Auto timed switchover from alert to evac (on rear terminals only).
  • 24V DC Operation 
  • 1U Half Rack Unit.

 

For more information regarding this product, please select the link below:

http://www.altronics.com.au/p/a4572-redback-alert-evac-tone-generator/

 

100% developed, designed & assembled in Australia. 
Single 1976 Redback PA products have been manufactured in Perth, Western Australia by Altronics. With over 35 years experience in the commercial audio industry, we offer consultants, installers and end users reliable products of high build quality with local product support.

For more information on this product, please select the link below:

Product Code: A4572

 

Site images remain the property of Fire Trader Australia Pty Ltd 2012